Page 40 Reset Picture parameters are replaced with the factory default values. You can activate either Dynamic, Standard, or Movie. Settings can be adjusted and stored for each external device you have connected to an input of the TV. The direct button on the remote control is 'P.
SIZE' button. If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Off - Turns the screen noise reduction function off.
Low - Reduces screen noise at a low level. Mode The Monitor has a built-in high fidelity stereo amplifier. Page 46 Equalizer You can adjust the left and right sound balance and the low or high volume as required. Page Available Modes TV Speaker If you set this menu "On", sound output from the speakers is muted in case of using the home theater.
Page Auto Program You can select a normal or wired channel. If the antenna input is not selected properly, noise may appear on the screen. It removes the scrambled channels from the list by tuning the digital cable channels. Page Signal Strength Fine Tune Due to weak signals or an incorrect antenna configuration, some of the channels may not be tuned correctly. Page 54 The language chosen affects only the language of the OSD.
If this occurs, set the time manually. Note Setting the clock is necessary in order to use the various timer features of the product. Rating" menu will appear in English only. Page 59 Downloadable U. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame. When watching TV at night, set the "Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption.
Page Troubleshooting Troubleshooting Self-Test Feature Check Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check Turn off both your computer and the monitor. Unplug the video cable from the back of the computer. Turn on the monitor. They may cause flaws or deformation of the screen sur- face.
Refer to Installing Driver The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely connected and tight- ened.
Ghost images are shown in the picture. Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes.
Page 70 Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity 5. You may see small particles if you look closely at the edge of the bezel sur- rounding the screen. At present, all digital TVs from Samsung Electronics have the wide aspect ratio. The analog TV cannot interpret digital signals. Page 72 Troubleshooting If a cable broadcasting company is sharing a common broadcasting facility for your apartment or tenement house, it has to adjust and send digital TV signals so that they are compatible to shared viewing which is the original purpose of the common broadcasting facility.
Page Preset Timing Modes Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically.
However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Horizontal Vertical Fre- Frequency Page For Better Display Information For Better Display Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality.
Note If temporary stops, mosaic screens, or jagged screens occur, this is not a TV problem. Contact your cable broadcasting company for a check-up.
Change the Color Information periodically Use 2 different colors. Ex Rotate the Color Information with 2 colors every 30 minutes. Ensure that the power plug is plugged into the power outlet firmly and correctly. Do not forcefully bend or pull the power plug and do not place any heavy material on it. Do not connect multiple appliances to the same power outlet.
Do not disconnect the power cord while using the product. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. Use only the power cord provided by our company. Do not use the provided power cord of another product. Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc.
Do not drop the monitor when moving it. Ensure that at least two persons lift and move the product. When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out.
Keep heating appliances as far away from the power cord or the product as possible. Do not install it in a badly ventilated location such as a bookcase or closet. Put down the monitor carefully. Do not place the front of the product on the floor.
Ensure that an authorized installation company installs the wall mount. Install your product in a well ventilated location. Ensure that there is a clearance of more than 10 cm from the wall. Bend the outdoor antenna cable downwards at the location where it goes in so that rainwater does not flow in. Install the antenna far away from any high voltage cables. Ensure that the packaging vinyl is kept away from children. If the height of your monitor is adjustable, do not place any object or part of your body on the stand when lowering it.
Do not spray cleaner directly onto the surface of the product. Clean the product using a soft cloth with a monitor cleaner only. If you must use a cleaner other than the monitor cleaner, dilute it with water at a ratio of When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth.
When cleaning the product, make sure to disconnect the power cord. When cleaning the product, disconnect the power cord and clean it softly with a dry cloth. These may change the appearance of the product surface and peel off the indication labels on the product.
Since the product housing is easily scratched, make sure to use the specified cloth only. As the product may be scratched if there is any foreign material on the cloth, make sure to shake it thoroughly before using it. When cleaning the product, do not spray water directly onto the main body of the product. The product is a high voltage product. Ensure that users do not disassemble, repair or modify the product themselves.
If the product needs to be repaired, contact a Service Center. If there is a strange smell or a strange sound or smoke is coming from the product, disconnect the power plug immediately and contact a Service Center. Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. If thunder or lightening is occurring, do not touch the power cord or antenna cable.
Do not try to move the monitor by pulling only the wire or the signal cable. Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables.
Make sure that the ventilating opening is not blocked by a table or curtain. Do not place any containers containing water, vases, flowerpots, medicines as well as any metal on the product. Do not use or keep combustible spray or flammable material near the product. Do not insert any metal, such as chopsticks, coins, pins and steel, or flammable objects, such as matches or paper, inside the product through the ventilating openings, input and output terminals, etc.
When using a fixed screen for a long time, an afterimage or stain may occur. Set a resolution and frequency appropriate to the product. When using headphones or earphones, do not turn the volume too high. If you continually move closer to the product screen, your eyesight may be failing. To ease eye strain, take at least a five-minute break after every hour of using the monitor.
Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. When moving the product, turn the power off and disconnect the power plug, antenna cable, and all the cables connected to the product. Ensure that children do not hang onto the product or climb up onto the product. If you do not use the product for a long period of time, disconnect the power cord from the power outlet.
Do not place any heavy items or toys or confectionery, such as cookies etc. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. Use only specified standard batteries. Do not use new and used batteries together. The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes.
The customer is responsible for returning the used or rechargeable batteries for recycling. Do not turn the product upside down or move it while holding only the stand. The more detail you provide for your issue and question, the easier it will be for other Samsung SyncMaster THD owners to properly answer your question. This manual comes under the category Monitors and has been rated by 1 people with an average of a 9.
This manual is available in the following languages: English. Is your question not listed? Problems related to Installation 2. Problems related to Screen 3. Problems related to Audio 4.
0コメント